JLG MODEL G10-55A
Big and strong, the JLG model G10-55A telehandler offers a 55-foot lift height for placing loads higher than most other telehandlers can go. And with a 10,000-pound capacity, spacious operator cab, all-wheel steering and a variety of optional Quick-Switch® attachments, the model G10-55A gives you a powerful productivity tool on any job site.
- 10,000 lb (4,536 kg) capacity
- Up to 55 ft (16.8 m) lift height
- 22% more cab room than older models for extra comfort
- All-wheel steering
- Ultra-strong boom allows for a full range of attachments
- Single joystick control for boom lift, crowd and fork tilt
- Power shift transmission
Click here to view Load chart
Back to Equipment Specs Page
Back to Home Page
*Stabilizers are required to achieve stated capacity.
| Model G10-55A | ||
| Rated Capacity @ 24 in. (610 mm) Load Center | 10,000 lb (4,536 kg) | |
| Maximum Lift Height | 55 ft (16.76 m) | |
| Capacity @ Maximum Lift Height | *5,000 lb (2,268 kg) | |
| Maximum Reach | 42 ft (12.8 m) | |
| Capacity @ Maximum Reach | *3,000 lb (1,361 kg) | |
| Approximate Operating Weight | 34,400 lb (15,604 kg) | |
| Length (Less Forks) | 240 in. (6.10 m) | |
| Width | 101 in. (2.56 m) | |
| Height | 101 in. (2.56 m) | |
| Wheelbase | 144 in. (3.65 m) | |
| Outside Turning Radius | 168 in. (4.27 m) | |
| Ground Clearance | 18 in. (457 mm) | |
| Drive | 4 x 4 | |
| Engine | John Deere 4045TF275 | |
| HP and RPM | 125 hp @ 2,400 rpm | |
| Transmission | Powershift | |
| Axle - Front | High-Bias, Limited Slip | |
| Axle - Rear | Trunnion Mounted Planetary | |
| Steering | All-Wheel | |
| Tires | 14:00 x 24 - 12PR, G2 type | |
| Maximum Travel Speed | 20 mph (32 kmph) | |
| Frame Tilt Left/Right Frame Leveling | ±10 Degrees | |