Standard Equipment
- Automatically activated pothole protection
- Built-in level sensor interlocks
- Fits in most standard elevators
- Printed circuit board with on-board LED diagnostics
- Joystick control on removable control console
- 3’ roll-out extension
- Responsive center pivot-type steering
- 3-speed drive/3-speed lift
- Dual wheel drive system
- Drive motion alarm
- 2-wheel parking brakes
- Drivable at full work height
- Swing-out trays for batteries and hydraulics
- Non-marking tires
- Battery powered with built-in smart charger
- 60 month factory warranty
Specifications
| Working Height | 21' (6.4 m) |
| Platform | ---- |
| Height | 15' (4.6 m) |
| Capacity | 600 lbs (272 kg) |
| Size | 29" x 64" (74 x 162 cm) |
| Guardrail Height | 42" (107 cm) |
| Toeboard Height | 6" (15 cm) |
| Stowed Platform Height | 36" (91 cm) |
| Stowed Overall Height | 78" (198 cm) |
| Overall Width | 30" (76 cm) |
| Overall Length | 65" (165 cm) |
| Wheelbase | 53" (135 cm) |
| Turning Radius | ---- |
| Inside | 19" (48 cm) |
| Outside | 77" (196 cm) |
| Gradeability | 25% |
| Drive Speeds | ---- |
| Speed No. 1 Elevated | 0.4 mph (0.6 kph) |
| Speed No. 2 Stowed | 1.2 mph (1.9 kph) |
| Speed No. 3 Stowed | 2.1 mph (3.4 kph) |
| Platform Lift Speed (3 speed control) | 15 sec minimum |
| Ground Clearance (approx.) | ---- |
| Platform Stowed/Pothole Protector Raised | 2 3/4" (7.0 cm) |
| Platform Raised/Pothole Protector Lowered | 3/4" (1.9 cm) |
| Tires | 4" x 12" |
| Type | Solid Rubber |
| Weight (approx.) | 2,300 lbs (1,043 kg) |
| Shipping Cube (with guardrails) | 88' (2.5 m) |
- Swinging gate
- AC outlet on platform
- GFCI AC outlet at platform
- D-Ring lanyard attachments
- Operator horn
- Flashing light
- Battery condition indicator
- EE rating
|
DANGER:
Models described on this page are NON-INSULATED and do not provide electrocution protection from contact with or close proximity to energized conductors which is pointed out on decals and placards attached to the machine.
Only qualified and trained operators are to be authorized to use and operate a work platform. Aerial work platforms must be elevated only on firm, level surface. Products in this page comply with applicable ANSI Standards. This page is for illustrative purposes only. Consult Operating/Maintenance and Parts Manuals for proper procedures. Specifications may vary and are subject to change without notice or obligation. |
Back to Home Page
Back to Equipment Specs Page
Go to Location Page
Go to service page
mail@selectaerials.com
Copyright
2000