Standard Equipment

Automatically activated pothole protection
Built-in level sensor interlocks
Fits through most standard doorways
Printed circuit board with on-board LED diagnostics
Joystick control on removable control console
3’ roll-out extension
Responsive center pivot-type steering
3-speed drive/3-speed lift
Dual wheel drive system
Drive motion alarm
2-wheel parking brakes
Drivable at full work height
Swing-out trays for batteries and hydraulics
Lift out battery tray
Non-marking tires
Battery powered with built-in smart charger
60 month factory warranty

Specifications

Working Height	26' (7.9 m)
Platform	----
Height	20' (6.1 m)
Capacity	800 lbs (363 kg)
Size	30" x 90" (76 x 229 cm)
Guardrail Height	41" (104 cm)
Toeboard Height	6" (15 cm)
Stowed Platform Height	37 1/2" (95 cm)
Stowed Overall Height	78 1/2" (199 cm)
Overall Width	33" (84 cm)
Overall Length	91" (231 cm)
Wheelbase	74" (188 cm)
Turning Radius	----

Inside	30" (76 cm)

Outside	101" (257 cm)
Gradeability	20%
Drive Speeds	----
Speed No. 1 Elevated	0.4 mph (0.6 kph)
Speed No. 2 Stowed	1.2 mph (1.9 kph)
Speed No. 3 Stowed	2.1 mph (3.4 kph)
Platform Lift Speed (3 speed control)	20 sec minimum
Ground Clearance (approx.)	----
Platform Stowed/Pothole Protector Raised	3 1/4" (8.3 cm)
Platform Raised/Pothole Protector Lowered	3/4" (1.9 cm)
Tires	4" x 16"

Type	Solid Rubber
Weight (approx.)	3,750 lbs (1,701 kg)
Shipping Cube (with guardrails)	139' (3.9 m)

Optional Equipment

Swinging gate
AC outlet on platform
GFCI AC outlet at platform
D-Ring lanyard attachments
Operator horn
Flashing light
Battery condition indicator
AC generator
EE rating
240 Amp/hr battery

DANGER: Models described on this page are NON-INSULATED and do not provide electrocution protection from contact with or close proximity to energized conductors which is pointed out on decals and placards attached to the machine.

Only qualified and trained operators are to be authorized to use and operate a work platform.

Aerial work platforms must be elevated only on firm, level surface.

Products in this page comply with applicable ANSI Standards. This page is for illustrative purposes only. Consult Operating/Maintenance and Parts Manuals for proper procedures. Specifications may vary and are subject to change without notice or obligation.