Standard
Equipment
- Proportional drive control
- Automatic brakes
- 180 degrees hydraulic platform rotation
- 12 volt battery operated emergency power
- Manual bleed down valve
- Driveable at full height
- 5 degrees tilt alarm
- 125 volt GFCI AC outlet at platform
- Aluminum upper boom
- Hour meter and ammeter
- Engine anti-restart control
- Hydraulic oil level and temperature gauges
- High engine temperature and low oil pressure shut-down system
- Lifting lugs
- 60 month warranty
Specifications
|
| Working Height |
43' (13.1 m) |
| Platform: |
. |
|
|
37' (11.3 m) |
|
|
600 lbs (272 kg) |
|
|
60" x 30" (152 x 76 cm) |
| Boom Construction: |
. |
|
|
Steel |
|
|
High strength aluminum |
| Boom Extension |
Double acting hydraulic cylinder |
| Boom Guides |
Lubrication free, ultra high molecular weight
polyethylene |
| Pivot Pin Bearings |
Lubrication free, composite material |
| Horizontal Reach |
32' (9.8 m) |
|
|
+75 degrees / -18 degrees |
| Hose & Wiring Extension |
Telescoping housing attached to sides of
booms |
| Turntable Rotation |
360 degrees continuous |
| Power Source |
Gas (LP or Dual Fuel optional) or Diesel
Engine |
| Fuel Capacity |
20 US gal (75.7 L) |
| Hydraulic System Capacity |
20 US gal (75.7 L) |
| Drive Speeds: |
. |
|
|
3 mph (4.8 kph) |
|
|
1 mph (1.6 kph) |
| Gradeability |
25% |
| Turning Radius: |
. |
|
|
5'2" (1.6 m) |
| Height (stowed) |
7'6" (2.3 m) |
| Width |
7'11 1/2" (2.4 m) |
| Length (stowed) |
26'2" (8.0 m) |
| Wheelbase |
8' (2.4 m) |
| Tires |
12" x 16.5" |
|
|
10 ply rating |
| Weight (approx.) |
10,500 lbs (4,763 kg) | |
Optional
Equipment
- Operator horn
- Platform control box cover
- Platform work lights
- Flashing light on boom
- Swinging gate
- Sandblast protection kit
- Driving lights
- Dual fuel or LP gas only
- Spark arrestor muffler
- Cold weather start kit
- AC generator (hydraulic powered)
- Drive motion alarm
- Foam filled tires
- Tow kit
- Four wheel drive
- Platform option
92" x 30" (234 x 76 cm) Alum.
|
| DANGER: Models described on this
page are NON-INSULATED and do not provide electrocution protection
from contact with or close proximity to energized conductors which
is pointed out on decals and placards attached to the machine.
Only qualified and trained operators are to be authorized to use
and operate a work platform.
Aerial work platforms must be elevated only on firm, level
surface.
Products in this page comply with applicable ANSI Standards. This
page is for illustrative purposes only. Consult
Operating/Maintenance and Parts Manuals for proper procedures.
Specifications may vary and are subject to change without notice or
obligation. | |
