Standard Equipment
- Fully proportional ramp-on controls for boom lift, swing, and drive
- Automatic braking
- 180 degrees hydraulic platform rotation
- 12 volt battery operated emergency power
- Manual bleed down valve
- Driveable at full height
- 5 degrees tilt alarm
- 125 volt GFCI AC outlet at platform
- Aluminum telescoping booms
- Hour meter and ammeter
- Engine anti-restart control
- Hydraulic oil level and temperature gauges
- High engine temperature and low oil pressure shut-down system
- 60 month warranty
|
Specifications 
| . |
TB 42 |
TB 420 |
| Working Height |
48' (14.6 m) |
| Platform: |
. |
|
|
42' (12.8 m) |
|
|
500 lbs (227 kg) |
700 lbs (318 kg) |
|
|
60" x 30" (152 x 76 cm) |
|
|
Steel |
High strength aluminum |
| Boom Construction: |
. |
|
|
Steel |
|
|
High strength aluminum |
| Boom Extension |
Double acting hydraulic cylinder and dual
wire rope cables |
| Boom Guides |
Lubrication free, ultra high molecular
weight polyethylene |
| Pivot Pin Bearings |
Lubrication free, composite
material |
| Horizontal Reach |
33' (10.1 m) |
|
|
+75 degrees / -18 degrees |
| Hose & Wiring Extension |
Telescoping housing attached to sides of
booms |
| Turntable Rotation |
360 degrees non continuous |
| Power Source |
Gas (LP or Dual Fuel optional) or Diesel
engine |
| Fuel Capacity |
20 US gal (75.7 L) |
| Hydraulic System Capacity |
25 US gal (94.6 L) |
| Drive Speeds: |
. |
|
|
3 mph (4.8 kph) |
|
|
1 mph (1.6 kph) |
| Gradeability |
25% |
| Turning Radius: |
. |
|
|
5'2" (1.6 m) |
| Height (stowed) |
7'9 1/2" (2.4 m) |
| Width |
7'11 1/2" (2.4 m) |
| Length (stowed) |
23'6 1/4" (7.2 m) |
| Wheelbase |
8' (2.4 m) |
| Tires |
12" x 16.5" |
|
|
10 ply rating |
| Weight (approx.) |
10,500 lbs (4,763 kg) |
11,150 lbs (5,058 kg) | |
Optional Equipment
- Operator horn
- Platform control box cover
- Platform work lights
- Flashing light on boom
- Swinging gate
- Sandblast protection kit
- Driving lights
- Dual fuel or LP gas only
- Spark arrestor muffler
- Cold weather start kit
- AC Generator (Hydraulic powered)
- Drive motion alarm
- Foam filled tires
- Tow kit
- Four wheel drive
- Platform options
TB 42
92" x 30" (234 x 76 cm) Alum.
92" x
30" (234 x 76 cm) Steel
TB 420
92" x 30" (234 x 76 cm)
Alum.
(Capacity 650 lbs. , 295 kg)
|
|
DANGER:
Models described on this page are NON-INSULATED and do not provide electrocution protection from contact with or close proximity to energized conductors which is pointed out on decals and placards attached to the machine.
Only qualified and trained operators are to be authorized to use and operate a work platform.
Aerial work platforms must be elevated only on firm, level surface.
Products in this page comply with applicable ANSI Standards. This page is for illustrative purposes only. Consult Operating/Maintenance and Parts Manuals for proper procedures. Specifications may vary and are subject to change without notice or obligation.
|
|
Back to Home Page
Back to Equipment Specs Page
Go to Location Page
Go to service page
mail@selectaerials.com
Copyright
2000