Standard Equipment



Specifications
Working Height86' (26.2 m)
Platform Height80' (24.4 m)
Capacity500 lbs (227 kg)
Size92" x 30" (234 x 76 cm)
ConstructionSteel
Boom Construction----
Base BoomSteel
Telescoping BoomsHigh strength aluminum
Boom ExtensionDouble acting hydraulic cylinder and dual wire rope cables
Boom GuidesLubrication free, ultra high molecular weight polyethylene
Pivot Pin BearingsLubrication free, composite material
Horizontal Reach71'1 1/2" (21.7 m)
Elevation+70°/-13 1/2°
Hose & Wiring ExtensionTelescoping housing attached to sides of booms
Turntable Rotation360° continuous
Power SourceGas (LP or Dual Fuel optional) or Diesel Engine
Fuel Capacity40 US gal (151.4 L)
Hydraulic System Capacity65 US gal (246 L)
Drive Speeds----
High (booms stowed)3 mph (4.8 kph)
Low (booms elevated).75 mph (1.2 kph)
Gradeability25%
Turning Radius----
Inside w/axle extended17'5" (5.3 m)
Height (stowed)9'7" (2.9 m)
Width (stowed)8'5 1/2" (2.6 m)
Length (stowed)38'10" (11.8 m)
Wheelbase12' (3.7 m)
Tires15" x 22.5"
TypeFoam filled, 16 ply rating
Weight (approx.)30,300 lbs (13,744 kg)



TB80 range drawing



TB80 general arrangement drawing





Optional Equipment



DANGER: Models described on this page are NON-INSULATED and do not provide electrocution protection from contact with or close proximity to energized conductors which is pointed out on decals and placards attached to the machine.

Only qualified and trained operators are to be authorized to use and operate a work platform.

Aerial work platforms must be elevated only on firm, level surface.

Products in this page comply with applicable ANSI Standards. This page is for illustrative purposes only. Consult Operating/Maintenance and Parts Manuals for proper procedures. Specifications may vary and are subject to change without notice or obligation.


Back to Home Page
Back to Equipment Specs Page
Go to Location Page
Go to service page
mail@selectaerials.com
Copyright 2000